Quelltext der Seite Verschieben einer CAD-Datei in ein neues Referenzsystem

[[it:Cambiare il Riferimento ad In Modello CAD]]
[[File:Transformation.png|thumb|right|400px|Transformation Menu]]

== Introduction ==
Moving a CAD model into a new reference system means to change the internal coordinate system of the model from the one decided by the Cad designed, into a new one which suit the need of the inspection.<br />
Even if it is possible and easier to create a reference system as per the Cad model, and then change the coordinate system in ARCO after the synchronization, in certain cases, it is preferred to change directly the model internal reference system.<br />
<br />
== Pre-requisites ==
The procedure the change a reference system of a CAD require some care and the basic steps are as follow:
#[[Importing a CAD Model|Import the CAD file]]
#Make sure that the current reference system is MAC
#Make sure model in [[Synchronize the Model to MAC refence system|synchronized to machine reference system]] 
#Make active the [[Cad View|CAD View]]
#Click on ''Modify - Transformation''
<br />
<br />
The first operation to be done is to fix the orientation of the model even if the origins are not being set yet, after that it will be fixed the origin and then, the last changes are symmetry and scaled.<br />
If some of the described steps are not required, then just skip to the next one.<br />

== General Consideration ==
[[File:Make Acopy.png|thumb|right|200px|Transformation Menu]]
The model is moving and not the reference system! <br />
If, when the transformation dialog is open, some part of the model is selected, then that part will be changed, if none of the part is selected then the whole model will be modified.<br />
if the Check box "Make A copy" is set, then the original model will not be deleted otherwise the modified model will substitute the original


== Changing the Orientation ==
In order to rotate a model, the procedure is as follow: 
#Select the Rotation about the axis the model needs to rotate
#Type the angle for rotation 
#Click append 
#Click Apply 
#Confirm that the rotation is to be applied to the whole model if no selectin was done.

== Changing the Orientation ==
In order to move the model to a new origin,, the procedure is as follow: 
#Select the Translation from the list 
#Type the value for each axis to be moved
#Click append 
#Click Apply 
#Confirm that the rotation is to be applied to the whole model if no selectin was done.


== Making a Symmetry ==
In order to create symmetrical definition of the model, the procedure is as follow: 
#Select the Symmetry plane required for the symmetry from the list
#Click append 
#Click Apply 
#Confirm that the rotation is to be applied to the whole model if no selectin was done.

== Changing the Scale of a Model ==
In order to scale a model, the procedure is as follow: 
#Select the Scale from the list
#Type the scale factor for each axis
#Click append 
#Click Apply 
#Confirm that the rotation is to be applied to the whole model if no selectin was done.


<gallery widths=150px heights=150px caption="Transformation Dialogs">
File:Rotation.png|Rotation from list
File:Translation.png|Translation from list
File:Symmetry.png|Symmetry from list
File:Scale.png|Scale from list
File:Rotation Dialog.png|Rotation Dialog
File:TRanslatin Dialog.png|Translation Dialog
File:Scale Dialog.png|Scale Dialog
File:Simmetry Dialog.png|Symmetry Dialog
</gallery>

[[it:Spostare un file CAD in un nuovo sistema di riferimento]]
[[zh-cn:将CAD文件移动到新的参考系统中]]
[[pt:Movendo um arquivo CAD para um novo sistema de referência]]
[[de:Verschieben einer CAD-Datei in ein neues Referenzsystem]]
[[es:Mover un archivo CAD a un nuevo sistema de referencia]]
[[en:Moving A CAD file into a New Reference System]]